Metal siding is widely used for commercial buildings, agricultural structures, workshops, warehouses and modern residential projects. Unlike traditional wood or vinyl siding, metal panels offer long service life, dimensional stability and a wide range of architectural designs.
For contractors and metal building manufacturers, producing siding panels in-house can create new business opportunities. The SS4E-HD Hydraulic Multi-Profile Roof & Wall Panel Machine from StanGroup is designed to manufacture several types of metal roofing and wall panel profiles using interchangeable tooling configurations.
From traditional Board and Batten siding to modern Standing Seam and Flush Wall Panels, this machine allows manufacturers to expand their product range without investing in a separate roll forming line for every profile.
This article covers the panel profiles and applications supported by the SS4E-HD, their design characteristics and the machine configurations available for different production environments.
Metal Siding and Wall Panel Profiles Produced by SS4E-HD
The SS4E-HD supports several metal panel configurations for exterior wall cladding, roofing and related building applications. Each profile has its own geometry, appearance and installation characteristics.
1. Board and Batten Metal Siding
Board and Batten is a vertical siding design inspired by traditional board-and-batten wood construction. Its appearance is characterized by wide flat panel sections separated by raised vertical battens, creating a distinctive architectural pattern with alternating flat and raised surfaces.
Metal Board and Batten siding combines the traditional appearance of wood siding with the durability and low maintenance of metal. It is relevant for manufacturers serving residential, agricultural and commercial construction markets.
- Vertical panel orientation
- Wide flat sections with raised vertical ribs
- Repeating architectural pattern
- Metal construction as an alternative to traditional wood siding
- Suitable for exterior wall cladding applications
- Residential homes, modern farmhouses and barndominiums
- Barns, workshops, garages and agricultural structures
- Commercial building exteriors
- Custom metal siding products
Commercial Opportunity: Board and Batten Production
Board and Batten provides manufacturers with an opportunity to serve customers looking for traditional architectural siding without the maintenance requirements associated with wood. Contractors can add a distinctive vertical metal siding option to their product catalogs and offer it for residential, agricultural and commercial projects.
The SS4E-HD can be configured to produce Board and Batten metal siding panels using the corresponding tooling setup.
2. Standing Seam Metal Panels
Standing Seam is a metal panel system featuring raised seams where adjacent panels connect. The seams create continuous vertical lines and provide a clean, modern architectural appearance.
Standing Seam panels are used for both roofing and exterior wall cladding. Their concealed fastening design provides a uniform exterior surface without exposed fasteners across the main panel field
.
- Raised longitudinal seams
- Mechanical double-lock connection between adjacent panels
- Concealed fastening system
- Continuous vertical architectural lines
- Suitable for roofing and wall cladding applications
The SS4E-HD supports mechanical double-lock Standing Seam production. This configuration is particularly relevant for manufacturers serving projects that require mechanically seamed metal panel systems.
Unlike Snap Lock profiles, mechanical double-lock panels require a separate seaming operation to close the panel seams after installation.
3. Snap Lock Metal Panels
Snap Lock panels use specially formed edges that connect by snapping adjacent panels together. Unlike mechanically seamed systems, Snap Lock profiles are designed to engage without a separate mechanical seaming operation.
These panels are commonly used in metal roofing and can also be applied to suitable architectural wall cladding projects. Their clean lines and concealed fastening appearance make them popular in modern residential and commercial construction.
- Raised vertical seams
- Specially formed interlocking panel edges
- Snap-together installation system
- Clean exterior appearance with concealed fastening
- No separate mechanical double-lock seaming operation
The SS4E-HD can be configured for Snap Lock panel production, giving manufacturers another panel system to offer alongside mechanical double-lock Standing Seam.
4. Flush Wall Panels
Flush Wall Panels feature a relatively flat exterior surface with clean, minimal lines. They are suitable for modern commercial buildings, architectural facades and projects where a smooth metal wall appearance is preferred.
Unlike pronounced ribbed or corrugated profiles, flush panels emphasize a simple, uninterrupted exterior design.
- Relatively flat panel surface
- Minimal raised detailing
- Clean architectural appearance
- Suitable for contemporary exterior wall designs
- Can be used in commercial and architectural cladding applications
The SS4E-HD supports Flush Wall Panel production, expanding the range of wall cladding products a manufacturer can offer.
Additional Panel Applications: Soffit and Underdeck
In addition to siding and wall panels, the SS4E-HD supports production of soffit and underdeck panels.
Metal Soffit Panels
Metal soffit panels are used to cover the underside of roof overhangs and eaves. They provide a finished appearance while protecting the underlying roof structure.
Depending on the selected profile, soffit panels can be used in residential, commercial and agricultural construction.
Metal Underdeck Panels
Underdeck panels are used in roof and ceiling applications where a finished metal surface is required beneath the main roof structure.
These products allow manufacturers to expand beyond exterior wall cladding and serve additional segments of the metal building market.
SS4E-HD Hydraulic Multi-Profile Roof & Wall Panel Machine
The SS4E-HD is designed for manufacturers who need the flexibility to produce different metal roofing and wall panel profiles using one machine platform.
Instead of purchasing separate equipment for every panel design, manufacturers can configure the SS4E-HD with interchangeable tooling setups for supported profiles.
Supported Production Profiles
The SS4E-HD can be configured for production of:
Each profile requires its corresponding tooling configuration. The available setups depend on the selected machine specification and production requirements.
Hydraulic Drive and Production Features
The SS4E-HD uses a hydraulic drive system designed for demanding metal panel production environments.
Hydraulic Roll Forming Drive
Designed for controlled metal forming operations during panel production.
Hydraulic Cutting System
Allows panels to be cut to the required production length.
PLC Control
Supports machine operation and production control.
Interchangeable Tooling
Enables production of different supported panel profiles using corresponding tooling setups.
Automatic Pre-Notching
Available as an option for selected panel configurations and production requirements.
Multiple Power Options
Honda gas-powered hydraulic station or electric configuration for shop production.
The combination of hydraulic drive, cutting and control systems makes the SS4E-HD suitable for manufacturers looking for a versatile multi-profile production solution.
Produce Metal Panels to the Required Length
Produce panels according to individual project specifications.
One of the practical advantages of in-house roll forming is the ability to manufacture panels according to customer requirements rather than depending exclusively on pre-cut panels from an external supplier.
Manufacturers can form metal panels from coil material and cut them to the required length using the machine's hydraulic cutting system.
This capability is particularly useful for:
- Long roofing and wall panels
- Custom residential projects
- Commercial building facades
- Agricultural buildings and workshops
- Projects with non-standard panel dimensions
Producing panels to order can help reduce unnecessary material handling and provide greater flexibility when fulfilling customer requirements.
Actual production dimensions and length limitations depend on the selected profile, machine configuration, material and operating conditions.
Hydraulic Drive Options for Shop and Mobile Production
The SS4E-HD can be configured for different working environments, from stationary manufacturing facilities to mobile production operations.
1. Honda Gas-Powered Hydraulic Option
A Honda gas-powered hydraulic power station supports mobile and off-grid production.
This configuration is particularly useful for contractors and manufacturers who need to operate at construction sites without depending on a permanent electrical connection.
- On-site roofing panel production
- Mobile metal siding manufacturing
- Agricultural and commercial construction projects
- Remote construction locations
2. Electric Hydraulic Power Option
An electric configuration is available for stationary production in workshops and manufacturing facilities.
This setup is suitable for businesses operating from a permanent production location with access to the required electrical supply.
3. Trailer-Mounted Configuration
The SS4E-HD can also be configured for trailer-mounted operation, depending on the selected equipment package.
Combining a suitable trailer setup with the Honda-powered hydraulic option allows manufacturers to transport their roll forming equipment to different job sites and produce panels closer to where they are needed.
For contractors working with long metal roofing and siding panels, mobile production can help reduce transportation challenges associated with handling finished panels.
Why Produce Metal Siding Panels In-House?
Owning multi-profile roll forming equipment can provide metal roofing and siding contractors with greater control over production schedules, panel lengths and product availability.
Expand Your Product Range
Offer Board and Batten, Standing Seam, Snap Lock, Flush Wall, soffit and underdeck panels using the appropriate tooling configurations.
Produce Panels to Order
Manufacture panels according to project specifications and required lengths, subject to the selected profile and machine capabilities.
Reduce Dependence on Outside Suppliers
Control more of the production process instead of relying exclusively on third-party panel manufacturers.
Take Production to the Job Site
With a suitable trailer-mounted and gas-powered configuration, contractors can produce panels at or near construction locations.
Serve Multiple Construction Markets
Supply metal panels for residential homes, barndominiums, agricultural buildings, workshops, warehouses and commercial properties.
The actual return on investment depends on machine configuration, production volume, material costs, labor, transportation and local market demand.
Configure Your SS4E-HD for Metal Siding and Roofing Production
Choosing the right machine configuration depends on the panel profiles you intend to manufacture and where production will take place.
When discussing an SS4E-HD purchase, manufacturers can evaluate the following options:
| Configuration | Available Setup |
|---|---|
| Panel profiles | Supported profile-specific tooling |
| Drive system | Honda gas-powered hydraulic or electric |
| Cutting | Hydraulic cutting system |
| Controls | PLC control |
| Pre-notching | Optional configuration |
| Installation | Stationary shop or trailer-mounted setup |
The final equipment package should be selected according to your required profiles, material specifications, production environment and business objectives.
SS4E-HD Machine Price, Options and Delivery
Looking to manufacture Board and Batten metal siding, Standing Seam roofing panels or other architectural wall profiles?
The SS4E-HD Hydraulic Multi-Profile Roof & Wall Panel Machine offers a flexible production platform for manufacturers who want to expand their metal roofing and siding operations.
StanGroup can help you determine the appropriate tooling configuration, hydraulic power option and equipment setup for your production requirements.
Contact StanGroup to request:
- Current SS4E-HD machine pricing
- Pricing for additional profile tooling
- Honda gas-powered or electric hydraulic configuration details
- Trailer-mounted equipment options
- Technical specifications and production configuration
- Delivery arrangements to the USA, Canada and Mexico