SS4E Standing Seam 4 Everyone     Now $12,5000               Call 814-326-4121

Liberty’s SS4E Standing Seam Roof Panel machine

ss4e151-900x900-650x650

Standing seam roof panel roll-forming machine SS4E-15 for 1" or 1.5" double standing seam profiles.

SPECIFICATIONS
• Length: 5' 4" (1.6m)
• Width: 3' 5" (1.1m)
• Height: 1' 9" (0.5m)
• Weight 1000 lbs. (455 kg)
• Speed: 30 ft/min (9m/min) Approx.
• Drive: Polyurethane and lower steel forming Rollers
• Shear: Manually Powered, Entrance end slitter
• Coil Width: 15” to 28" (380mm to 711mm)
• Materials Formed
• Steel 30 ga. to 24 ga. (.3mm to .6mm)
• (painted, galvanized, aluminized)
• Aluminum .019" to .032" (.5mm to 08mm)
• Copper 16 oz. to 20 oz. 3/4 Hard
• (.5mm to .7mm)

STANDARD FEATURES
• Polyurethane and Bottom Forming Drive Rollers
• Hard Chrome Steel Forming Roller System
• Easy to operate Entrance End Manual slitter cutoff
• Portable Dongle for Ease of Operation
• Width Adjusted with simple crank
• Push Button RUN/JOG Controls on corded dongle
• Length Control Limit Switch
• Clip Relief Roller Set
• Two Sets of Bead Rollers
• 1.5 HP Electric Motor
• Welded Tubular Steel Frame
• 3 Year Limited Parts Warranty

• Standard delivery terms: 6 weeks after 30% deposit.


OPTIONS

table

ROS-10 Run Out Table    $250 ea.

Table attaches to shear and is used to support panel as it exits the machine. Adjustable leg allows variation in height from 25” to 43”. Available in connectable 10 ft. sections.

EXA Expandable Arbor    $1450 ea.


Used for holding coil. This arbor expands to the inside diameter of the coil for faster, easier loading. Can accommodate coils with 16” to 20” ID. Capacity is 3,000 lbs. when used remotely with Free Standing De-Coiler.

decoiler_s-650x650




FSDC Free Standing De-Coiler stand    $950


A Remote stand used at the entry end of the machine to hold one Expandable Arbor with coil or one De-Coiler Reel with coil. (Picture shows optional EXA) This can also be mounted on machine for overhead reel holder.

reverse_rollers-650x650


RER Reverse Entrance Rollers $750


Bolt on entrance roller needed when FSDC above is mounted on the SS4E to reverse the coil at entrance end.



ss4e158


WHSD Warehouse Stand with Rollers $1150


Easy to mount SS4E for warehouse use with rollers for mobility.



graycssdc_1


D200 Console Single Stand De-Coiler $770


A Remote stand used at the entry end of the machine to hold one Expandable Arbor with coil or one De-Coiler Reel with coil. Max capacity 1,500 lbs. No need to take of the reel to set on a coil.

Hand_Seamer



HS1  Hand Seamer for Mechanical Seam 1” or 1.5”

Hand held device used to single-lock mechanically seamed panels.



EXTRA ROLLER SYSTEMS: Forming rollers used to form various panel profiles. 

doublelock-standing-seam-details

SS100 1” Mechanical Seam     $4800 







SS150 1.5” Mechanical Seam $5000


FF100 1” Fastener Flange Snap Lock $7250

(Coming Soon)

snap_lock1


SL175 1.75” Snap Lock $5900(Coming Soon)




  © Admin 2018