Lock Forming Machinery

TDF Lock & Cleats Former

1dsc_0983-200x200

This machine provides alternative method of buying expensive knock on flange. (To make a piece of duct in old way you have to take the flange off the shelf, cut four pc, deburr it, fit it with thick expensive corners, place on the end of the raw edge, and either tech screw or spot-weld and seal.) Using TDF you just need to notch your sheet, roll-form the flange, bend up the duct and clip in four regular corners (Automatic corner fixing machine). The TDF method will save you approximately $40 per joint.  Eliminates the necessity to stock knock on flange, it saves your cash flow as well as labor savings. Any serious Duct Manufacturer can not afford to not use either TDC or TDF. You'll be amazed at the savings your business can make with this machine. 


Pittsburgh Lock Forming Machine

lockformer5-900x900-228x228

Pittsburgh lock-forming machine designed to make 6 types of heavy gauge locks 19 - 26 Ga (0,45 - 1.2mm) low carbon steel. Pittsburgh lock. Standing Seam lock. Single Hem L. Double Hem Z. Standing seam Locking pin C. Radial single hem L.Machine designed for industrial manufacture of the HVAC systems, with high efficiency, low noise and good performance.Standard set of rolling tools allows to form 6th main locks to connect square ducts, round ducts, square elbows, linear connections via C profile.


LC-10BR Pittsburgh Lock Forming Machine

wdsc_1022-228x228

LC-10BR Pittsburgh lock-forming machine designed to make 4 types of heavy gauge locks 19 - 26 Ga (0,45 - 1.2mm) low carbon steel. Pittsburgh lock. Seam lock. Locking pin C. Radial single hem L.Machine designed for industrial manufacture of the HVAC systems, with high efficiency, low noise and good performance.Standard set of rolling tools allows to form 4th main locks to connect square ducts, round ducts, square elbows, linear connections via C profile.

Button Punch Snap Lock-former

1dsc_1072-228x228


Button Punch Snap Lock-former For Square Ducts



 




snap_l

LC-15 HVAC Lock Forming Machine

swdsc_1065-400x400


LC-15 HVAC lock-forming machine designed to make two types of heavy gauge locks 19 - 26 Ga (0,45 - 1.2mm) low carbon steel. Machine designed for industrial manufacture of the HVAC systems, with high efficiency, low noise and good performance.

Лист1

Main advantages of our Pittsburgh Lock Forming Machine

  • Heat treated roller tools;
  • Machine forms two different lock shapes without complex adjustment or rollers interchange;
  • Compact size and mobility;
  • High efficiency;
  • Warranty 2 years;
  © Admin 2018