MACH II Gutter Machines5”, 6”, 5-6 Combo
The ORIGINAL polyurethane drive system.
U.S. Patent No. 5,394,722
U.S. Patent No. 5,740,687
VERSATILE. . . INNOVATIVE. . . DEPENDABLE. . . PROFITABLE New Tech Machinery’s patented Mach IITM has taken the seamless gutter
industry to a new level. The only way to compete in the gutter forming
business is to own a MACH II. Don’t get stuck with an imitation.
Separate Polyurethane Drive Rollers
Stainless Steel Forming Rollers
Push Button RUN/JOG Controls at Entry and Exit Ends
Forward Pulling, Easy Cut Shear
Power Interruption Safety Circuit
Two 360º Rotatable Reel Stands with Easy Lift Reels
Welded Tubular Steel Frame
1000 lbs (454kg)
1250 lbs (570kg)
1350 lbs (610kg)
plus shear handle plus shear handle plus shear handle
50 ft./min (18 m/min) Approx.
Manually Powered, Hardened Tool
Steel Blade and Dies
Materials Formed Steel 30 ga. to 24 ga. (.3mm to .6mm)
Aluminum .019” to .032” (.5mm to .8mm)
Copper 16 oz. to 20 oz. 3/4 Hard (.5mm to .7mm)
Material Width 5” Machine: 11-3/4” to 12-3/8” (300mm to 315mm)
6” Machine: 15” (380mm)
Note:Requires 10 gauge, 15 Amp Extension Cord.
All New Tech Machinery Roll Forming Equipment is Warranted for:
Limited three year parts/one year labor
Limited lifetime separation on drive rollers
Limited lifetime on stainless steel
5" and 6" Profiles
(Click on image for
5" info on profile)
OPTIONS - MACH II Gutter Machines5", 6", 5-6 Combo
Turnstile Reel Stand
Machine mounted stand for holding reeled coils of material. Rotates 360 degrees for ease of loading. Machine capacity is 3 total.
Reels 15 in. or 20 in. ID
Adjustable width reels will accept
11 3/4 in. or 15 in. wide material for 5 in. or 6Ħħ in. gutter. Capacity 1,000lb.
Run Out Stand
Supports gutter as it runs out of machine. Tripod style stands with 1 adjustable leg for leveling and conveyor roller to support gutter. One stand recommend for every 20 ft. of gutter. Adjustable in height from 31in. to 45Ħħ in.
Used to transfer loaded coils from one turnstile reel stand to the other. (1 set / machine needed)
SH5 & SH6
Mechanically advantaged forward pulling shear for cutting 5 & 6 gutter to length.
Used to hold full or partial coils for 5Ħħ and 6Ħħ gutter. Can be machine or floor mounted. Capacity 700lbs.
6 & 5/6
Forms a 5/16 in. hook on the back of the gutter for use with free float hanger system. Also accommodates standard hangers or spike ferrule.
Back Flange 1" and 1.5" Ħħ
Forms 1" or 1.5" flange on back of 5 in. Ħħ or 6 in. gutter eliminating the need for flashing. Used with 5 in. or 6 in.Ħħ machine only.
Back Flange Shear
Mechanically advantaged forward pulling shear for cutting 5 and 6Ħħ back flange gutter to length.
12 Volt Electrical System
DC Motor and control to allow operation of machine with 12volt battery. (Battery not included).
Bottom Bead Assembly
Adds unique design to bottom of gutter.