* Separate Polyurethane Drive Rollers
* Hardened Stainless Steel Forming Roller System
with Shear Dies
* Quick Change Power PacTM, Gas or Electric
* Computer Length & Batch Control
* Power Interruption Safety Circuit
* Hydraulic Drive and Shear
* Length Control Limit Switch
* Two Sets of Bead, Pencil, or V Rib Rollers
* Push Button RUN/JOG Controls at Entry and
* Welded Tubular Steel Frame
Length 12’ 10” (3.9m)
Width 3’10” (1.2m)
Height 4’3” (1.3m) w/ Over Head Rack
2’0” (.6m) w/o Over Head Rack
Weight 2200 lbs. (1000kg)
FWM On Trailer Length 17’6” (5.3m)
Width 7’ (2.1m)
Height 6’3” (1.9m) with reel
Weight 3800 lbs. (1700kg)
Materials Formed Steel 30 ga. to 24 ga. (.3mm to .6mm)
(painted, galvanized, aluminized)
Aluminum .019 in. to .040 in. (.5mm to 1.0mm)
Copper 16 oz. to 20 oz. 3/4 Hard
(.5mm to .7mm)
OPTIONS - FWM
Quick Change Power Pack
Used to quickly field convert SSH or FWM machine from gas engine to electric motor and back again as needed.
Run Out Table
Conveyer style table attaches to shear and is used to support panel as it exits the machine. Two individually adjustable legs allow variation in height from 25” to 43”. Available in connectable 10 ft. sections.
Used for holding coil. This arbor expands to the inside diameter of the coil for faster, easier loading. Can accommodate coils with 16” to 20” ID. Capacity is 3,000 lbs. when used with Dual Overhead Reel Stand or Single Free Standing De-Coiler.
NATM Compliant, 12,000 lb. tandem axle trailer used for towing any NTM roofing machine directly to the jobsite. Equipped with crane lifting eyes, 4 drop-foot jack stands and electric brakes w/ breakaway kit.
Dual Overhead Reel Stand
Machine mount overhead stand for holding up to two Expandable Arbors with coil or two De-coiler Reels with coil for a combined total capacity of 6,000 lbs.
Single Free Standing De-Coiler
A Remote stand used at the entry end of the machine to hold one Expandable Arbor with coil or one De-Coiler Reel with coil. Total capacity 3,000 lbs.
Shown with optional DR01-EX
Pencil, Bead, V and Straition Rollers
A variety of ribs used to aesthetically enhance standing seam panels.
Used to mount additional rib or striation rollers making changeovers fast and simple.
Adds perforation to standard flush wall panel for use as Soffit. Converts quickly.
Profile and Machine
Select X mark to
connect to .PDF drawing for each panel Requires that Adobe Reader be installed